Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed)

Write this blog to share my problem about Autel MaxiSys Pro MS908P key erasure on 2000 ford focus and its solution with you
1.1

2000 Ford Focus Z-Tech Diagnostic tool used:

Autonumen.com Autel MaxiSYS MS908P Issue description:

I intended to replace the PCM in my vehicle With followed all the instruction for key erasure, the MS908P seemed to freeze at the 9 second make on the task bar

Reasons:

The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working Keys

Solution:

1.Download the beta version V6.12.10 to have a test.

2.Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed

Turn the ignition key to position 0

Cycle keyl in the ignition from OFF to RUN for at least 3 seconds

Cycle key2 in the ignition from OFF to RUN for at least 3 seconds

Cycle keyl in the ignition from OFF to RUN for at least 3 seconds

Two keys are programmed now

Be the first to comment

Leave a Reply

Your email address will not be published.


*