iCarScan VCI Quick Start Guide

Launch X431 iCarScan Super Launch X431 iDiag Bluetooth Diagnostic Scanner for Android with Free 5 software Full System is the newest product New Released by obd2tool. it is more powerful than launch x431 idag‘s function. Follow OBD2TOOLshare with you iCarScan VCI Quick Start Guide

Note: This Quick Start Guide applies to the Launch X431 ICarScan VCI (Vehicle Communication Interface) connector
and is subject to change without prior written notice.

Precautions on operation

Before using this product, please read the following information carefully.

1.The illustrations herein are for reference only and are subject to change based on the smart mobile
terminal you are using and / or software updates.
2. Always perform automotive testing in a safe environment.
3. The instrument is a precision electronic instrument. Pay more attention when in use, NEVER have it
dashed.
4. Do not connect or disconnect the VCI connector while the ignition is on or the engine is running.
5. Do not keep the VCI connector plugged into your vehicle overnight, be sure to always remove
connector once testing and/or diagnosis is complete. Failure to do so may result in drained or
weakened battery.
6. Do not drive the vehicle and operate the VCI connector at the same time. Any distraction may cause
an accident.
7. To avoid damaging the VCI connector or generating false data, please make sure the vehicle
battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and
secure.
8. Keep the VCI connector dry, clean, free from oil, water or grease. Use a mild detergent on a clean
cloth to clear the outside of the connector as necessary.
9. Attention: The purchasing agreement for the software is for ONE year subscription

Be the first to comment

Leave a Reply

Your email address will not be published.


*