GM MDI Program Chevrolet Tahoe 2016 Key via SPS

GM MDI Program Chevrolet Tahoe 2016 Key via SPS-1 (2)

Tutorial: GM key programming using GM scan tool and SPS (Service Programming System) online subscription.
Model example:
Chevrolet Tahoe 2016
(the procedure can be applied to other GMs)
Tools needed:
A GM scanner (GM MDI, GM MDI2, VXDIAG GM)
GM Online SPS programming subscription
Original remote and a new remote key (add a remote)
Procedure:
(* Click to enlarge images)
After connect MDI2 interface and built connection
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-1 (2)
Access SPS programming
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-2 (2)
Select vehicle model: Chevrolet Tahoe 2016 Light duty truck
Communicating with the GM MDI
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-3 (2)
Detect VIN and enter job card number to access
(There is a field activation for this vehicle)
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-4 (2)
Select controller: Keyless Entry Control Module and press Next
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-5 (2)
Select special function: Program Transponder or Remote Key (Add key)
Turn off all power consuming components after each ignition cycle.
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-6 (2)
Insert next key in the transmitter pocket and press Next
Place all other keys outside of the vehicle
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-7 (2)
Wait it counts down from 12 mins to 0
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-8 (2)
All transponder keys have to be synchronized with the vehicle.
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-9 (2)
Follow steps below to sync key
1.Remove the key from the transmitter pocket
2.Press the Lock button on key
3.Press the Unlock button on key and press Next
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-10 (2)

GM MDI Program Chevrolet Tahoe 2016 Key via SPS-11 (2)

GM MDI Program Chevrolet Tahoe 2016 Key via SPS-12 (2)
Starts to program next key
Insert next key in the transmitter pocket and press Next
Place all other keys outside of the vehicle
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-13 (2)
Press Start/Stop button and start the engine
Current Power Mode Status: OFF
Wait 5 seconds
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-14 (2)
Press Start/Stop button and start the engine
Current Power Mode Status: RUN
Follow steps below to sync key
1.Remove the key from the transmitter pocket
2.Press the Lock button on key
3.Press the Unlock button on key and press Next
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-15 (2)
The immobilizer procedure completed successfully.
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-16 (2)
Check if the new key can start engine. For a vehicle with manual transmission, if the engine does not start, please check that the clutch pedal is learned.
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-17 (2)
Action completed.
Clear DTCs.
GM MDI Program Chevrolet Tahoe 2016 Key via SPS-18 (2) GM MDI Program Chevrolet Tahoe 2016 Key via SPS-19 (2) GM MDI Program Chevrolet Tahoe 2016 Key via SPS-20 (2)

GM MDI Program Chevrolet Tahoe 2016 Key via SPS-21 (2)
Perform account for wireless charger and disable passive enter calibration programming until finished.
The whole process is done.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>