Month: April 2022

Tacho Programmer Digital Tachograph Programmer CD400 TRUCK TACHO Speedometer

Tacho Programmer Digital Tachograph Programmer CD400 TRUCK TACHO Speedometer 1.What is a tachograph? What is a tachograph? Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk. The new

GM MDI 2 Genuine and Clone Table Comparison

Look here: GM MDI 2 what’s the difference of the genuine and the china knock-off? compared with MDI 1, what’s good of MDI2? Should you buy a new one? Product GM MDI 2 (genuine) GM MDI 2 (clone) Photo Original Original from the dealer China clone off autonumen.com Price 1200 usd or so 229

Vediamo works with DoIP Xentry Connect C5 – Confirmed!

2017 new DoIP Xentry Connect C5 new test reports: C5 is verified to work well with Vediamo software for Benz diagnosis / modification / programming. Tested by professionals working for Autonumen.com What is Xentry Connect C5? It’s a new MB diagnostic tool, released in Nov. 2017. it’s a real C5,

VXDIAG VCX SE Series Diagnostic Tools Buying Tips

The diagnostic tools of the VXDIAG VCX SE series are characterized by a small, robust construction, good quality and easy transport. The powerful interface includes multi-brand vehicles in a single device, very suitable for auto repair shops, auto refitting studios, auto programmers and auto refitting enthusiasts, etc. As there are

JCB heavy duty truck diagnostic tool review

  JCB Electronic Service Tool diagnostic interface is used for fast and effective fault finding, check maintenance standards, see if the machine has been abused, view and change machine set up data, flash ECUs with the correct data files. You can resetEMShours, edit speed limiters and use other functions what

How do I install John Deere Service Advisor 4.2.005 on Win 10 64-bit?

John deere EDL V2 diagnostic kit with Service Advisor EDL V2 V4.2 Software, you can view service manuals, use DTAC (Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers. John Deere EDL V2 Highlight 1. John Deere Service Advisor EDL (Electronic Data Link) heavy duty diagnostic adapter

Tachograph programmer CD400

Tachograph programmer CD400 Calibrates and programs all analogue and digital tachographs up to the Smart tachograph (1C/ Gen-2) New functions – High accuracy W measure with photo sensor – Multi W measures with calculation of the average – Support of the DTCOSIM Features Multi language English, Deutsch, Español, Français, Nederlands,

How can I reflash the GM MDI2 clone firmware?

The reason why the GM MDI/MDI2 interface firmware is updated is because it is compatible with the latest original GDS2 software, and the latest v2020.12 Bosch software can only recognize it after the firmware update. Here we go for GM MDI Manager update procedure. Press and hold the power button

Solution: VXDIAG VCX SE BMW software error 0xc000014c

Customer problem: When I run the VXDIAG VCX SE BMW software on my computer, it cannot start normally and shows error 0XC000014C. How can this problem be fixed? autonumen.com chief engineer gives the suggestion: Please repair the system according to the following steps. Step 1: Download the repair software (Xiaobaixitong.com)

How to update and flash MB SD C5/C4Plus firmware?

Here we share the procedure to update and re-flash MB SD C5/C4Plus, if something goes wrong with the firmware, you may need it.  1.Procedure to update firmware: Notice: MB SD C5 needs six AA batteries while DOIP MB SD C4 Plus doesn’t. Connect the device to OBD port or 12V