Tag: MB SD Connect Compact 4 Star

How to update MB SD C4 Diagnostic Multiplexer

Here are the step-by-step instructions for updating the kernel software (operating system) on your Star Diagnosis MB SD Connect C4 multiplexer. The kernel update of the SDconnect is similar to a regular software update via the Star Diagnosis system. Step 1. Check battery if needed (only if related message is

MB SD Connect C4/C5 Star Diagnosis tool cannot measure the car

The customer connected the Mercedes-Benz to be tested, opened the MB SD Connect C4/C5 xentry software, and selected the corresponding model. The final step of the test is as follows: The above problem occurred and the hardware of MB SD Connect C4/C5 was not found. Generally there are three problems:

MB SD Connect C4/C5 Star Diagnosis tool cannot measure the car

The customer connected the Mercedes-Benz to be tested, opened the MB SD Connect C4/C5 xentry software, and selected the corresponding model. The final step of the test is as follows: The above problem occurred and the hardware of MB SD Connect C4/C5 was not found. Generally there are three problems:

Sloved!Some Mercedes-Benz can’t be tested with MB Star C4/C5 MB SD Connect Compact C4/C5 Diagnosis tool

Recently, there are many customers who have reflected,the following tips appear when testing some Mercedes-Benz cars with V2018.09 MB STAR C4 SD Connect Compact Diagnosis tool: We first checked the hardware of MB STAR C4/C5 and found that the hardware works normally. The problem should be in the software section.

Difference between MB Star C3 and MB Star C4

Many times ago, i saw a blog about MB sd connect C4 for benz, the author said he like this tool very much, and make a comparison with mb star c3 for a result that MB Star C4 is much better than c3, I was not too much attention to

New Arrival MB SD Connect Compact 5 (MB SD C4) Star Diagnosis

MB SD Connect Compact 5 has same function as SD C4 but with new design, support both cars and trucks, support wireless connection. It can Not Only Support K Lline Diagnose and CAN BUS, But Also UDS Diagnose Protocol. Because old MB Star C4 main board do not have UDS

How to update Benz MB SD Connect C4 firmware to 2.30

If the Mercedes Benz MB SD Connect C4 diagnostic system reports “DCDI-eErrorCode=204 (204)” error, the possible reason is that the SD Connect Star diagnosis firmware program was deleted so that the Star multiplexer WIFI and configuration are failed. The only solution is to update and flash the firmware.  Error screenshots

How to install MB SD C4 WiFi card

There have one customer had MB SD Connect C4 Benz diagnostic tool for more than 2 weeks and has used it to diagnose several vehicles. But he was wondering how to use its WiFi card and what the WiFi card can do. Here I would like to share the answer