Registion of Launch x431 creader VIII CRP129?

Registion of Launch x431 creader VIII CRP129?
1) Register CC number.
Go to website of dbscar. Then creat a CC account for you. (Do not forget your CC account. In the future, you will need to use this account to log in official website and update your tool). You will find the “register” option in the top right corner, click it, then fill your information. Then CC number is registered ready.
Launch X431 Creader VIII CRP129
2) Register your Device.
Log in dbscar website. Then it will ask you to register your Device. Find your device Type. For the password. Start your creader VIII CRP129, go to “Help” option. Then you will get the password. Fill this password in the password box. For dealer code, our dealer code is “86A”. After you done these all, then your device is successfully registered. Now go to “download center”, you will find all the software you need. Download the software and install it to your device.
For this code reader, there is no IP limitation. You can download the software anywhere you like.
3) In the future, if you want to update your tool, you can use your CC number to log in official website to download the latest software to update your tool.
4) If you still meet problem in registertation. Please contact us, we will try our best to help you use this obd2 tool successfully

Went with the part d/wired multiplexer. External HDD, using VMware based virtual machine on a win7 based system, rs232 to USB adapter.It was a major pita to setup and get working, but once done operates Mercedes benz star C3. I have left this laptop dedicated for the star system from then on to avoid problems.If you have or are willing to buy crp129 one of the internal drive setups with matching laptop (eg t30 or d630) it will save some hassle – but once properly setup will work fine on other laptops as well.It paid for itself in a week as I had a SRS code that had to be read to find problem, then cleared once I fixed it. Have used it for some developer mode tweaks and to read a fluke ABC code in history.

EVG7 Diagnostic Controller Tablet PC is fully-compatible for vehicle diagnostic devices software, especially being used by professional garage and mechanic car repair services. wobd2 engine has tested a part of software successfully, including MB SD C4, Star C3 and C4, BMW ICOM software HDD etc, on EVG7 DL46/HDD500GB/DDR2GB Diagnostic Controller Tablet PC. Please refer to the following test for MB SD Connect C4 Star Diagnostic software.