Start X431 PAD VGuided Function Tutorials

Launch X431 PAD V Tutorials: Perform the guided function — A/C compressor first run for VW PASSAT 2013.
Start X431 PAD VGuided Function Tutorials-1

Here is the detail steps:

Select “Passat” and then “Vehicle version information”, connecting the VCI in Wifi mode…
Start X431 PAD VGuided Function Tutorials-2
Select “Guided Functions”.
Start X431 PAD VGuided Function Tutorials-3

Enter “System List”.

identify vehicle information again: VW PASSAT 2013
Start X431 PAD VGuided Function Tutorials-4

Enter “08 Climate Control Module” and then “Guided Function” at the right up corner.
Start X431 PAD VGuided Function Tutorials-5

Select “08 – A /C / Heating Electronics (A /C – manual)”.
Start X431 PAD VGuided Function Tutorials-6

And then “08 – A /C Compressor First Run, (Repair Group 87) “.
Start X431 PAD VGuided Function Tutorials-7
Follow the on-screen steps to perform.
Start X431 PAD VGuided Function Tutorials-8

Press “Continue /Complete” to perform A /C Compressor First Run.
Start X431 PAD VGuided Function Tutorials-9

What component has been replaced:

1.A /C Compressor – A /C Compressor First Run Activate
2.A /C Control module J301 – A /C Compressor First Run Deactivate.
End.

Next is to follow to operate until successfully.
Start X431 PAD VGuided Function Tutorials-10 Start X431 PAD VGuided Function Tutorials-11 Start X431 PAD VGuided Function Tutorials-12 Start X431 PAD VGuided Function Tutorials-13 Start X431 PAD VGuided Function Tutorials-14 Start X431 PAD VGuided Function Tutorials-15 Start X431 PAD VGuided Function Tutorials-16 Start X431 PAD VGuided Function Tutorials-17 Start X431 PAD VGuided Function Tutorials-18
Guided function is also applied to X431 Pro V4.0, X431 Pro3 v4.0, X431 PAD VII.

Be the first to comment

Leave a Reply

Your email address will not be published.


*