Autonumen.com AUTEL MaxiSYS MS906TS When using headphones, do not raise the volume too loud to listen to large volume Long time excessive stimulation of the ear may cause hearing loss.
safety warning:
◆always in a safe environment for car testing.
◆Wear ANSI-compliant safety eye protection.
◆Put clothes, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
◆Operate vehicles in well-ventilated work areas, toxic to the exhaust.
◆Place the transmission in the PARK (automatic transmission) or NEUTRAL (manual transmission) and ensure that the parking brake is engaged.
◆Place the block in front of the drive wheel and do not leave the vehicle during testing.
◆Be especially careful when working around the ignition coil, dispenser cover, ignition wire and spark plugs. When the engine is running, these parts will produce dangerous voltage.
◆Keep fire extinguishers suitable for nearby petrol, chemical and electric fires.
◆Do not connect or disconnect any test equipment when the ignition switch or engine is running.
◆Keep the test equipment dry, clean, oil free, water or grease. Use a mild detergent on a clean cloth and clean the outside of the device as needed.
◆Do not drive vehicles and operate test equipment at the same time. Any distraction may cause an accident.
◆For vehicles that are being repaired, refer to the service manual and follow all diagnostic procedures and precautions. Doing so may result in personal injury or damage to the test equipment.
◆To avoid damage to the test equipment or to generate false data, make sure that the vehicle battery is fully charged and that the connection to the DLC is clean and secure.
◆Do not place the test equipment on the dispenser of the vehicle. Strong electromagnetic
interference can damage the equipment
http://www.autonumen.com/goods-5226-AUTEL+MaxiSYS+MS906TS+Auto+Diagnostic+Scanner.html
Leave a Reply