Porsche PIWIS 2 is Porsche dealer lever device for Porsche diagnostic & programming. Some Client order Porsche PIWIS 2 come hardware only without user manual. Below Autonumen.com share Porsche Piwis 2 Control Unit List/Overview Operating Instruction as following.
Porsche Piwis 2 Control list operating guide
How to operating Porsche Piwis 2 Control Unit List/Overview?
When the Porsche PIWIS 2 application is started, the control units of the ODX project are displayed in the control unit list (A). A control unit search is started by pressing the <F12> button (B).
The Porsche Piwis 2 control unit overview (C) then shows a list of control units with the control units markedthat it was possible to address in the search. Control units that could not be addressed are greyed out.
By pressing the <F11> (D) button, you can return to the Porsche Piwis 2 control unit list.
If you select at least one control unit in the Porsche Piwis 2 control unit list or control list overview, you can select a function group from the menu bar (E).
Porsche Piwis 2 Selection-independent access to the general vehicle functions (F) is possible in the control bar.
Any question Porsche Piwis 2 Control Unit List just contact us freely.
Leave a Reply