1. Connect the ICOM to the computer with a network cable, and power up the ICOM with a 12V power adapter or
Passengers pick up the bus.
2.Use IE browser to open http://169.254.92.38:60080/ (when diagnosing according to ICOM
The IP address shown or the ICOM address read by ItoolRadar shall prevail), user name/
Password: root/NZY11502
3.Click “Update Firmware” and you will see the version information of ICOM firmware.
4.Choice ICOM-BootImage-01-24-00.bin （ Upgrade file path： C:/Program Files(x86)/Tools/Icom-ApplicationImage-01-41-00c），“ image type“ Set to“SYSTEM“， click “Send the file”。
5.When it prompts “Write the image file to the flash?” , click “Yes”, and then the lights will turn red.
6.When it prompts “The SYSTEM IMAGE update was successfull”，click”Update Firmware”。
7.Select icom-applicationimage-01-38-01.bin and set image type to APPLICATION, click “Send the file”, the file will take a few minutes.
8.When it prompts “Write the image file to the flash?” , click “Yes”, and then the lantern festival turned red for the second time.
9.When it is all right, click “reboot”. Upgrade complete
Leave a Reply