Category: BMW ICOM

ICOM NEXT for BMW ISTA-D ISTA-P Software Download and Installation Guide-2

ICOM NEXT for BMW ISTA-D ISTA-P Software Download and Installation Guide

ICOM NEXT is professional diagnostic tool for all BMW E/F/G series cars, MINI, Rolls-Royce BMW-Model.  And it supports programming offline directly.  BMW ICOM software works with ICOM NEXT well, also ICOM A2. Autonumen.COM here provide BMW Win7 ISTA-D/P software download and installation guide. 1. BMW ICOM Software Overview: Software Version:

ICOM-A2-B-C-For-BMW-Diagnostic-Programming-Tool-With-ISTA-D-4.12.12-ISTA-P-3.65.0.500-1

ICOM A2+B+C For BMW Diagnostic & Programming Tool With ISTA-D 4.12.12 ISTA-P 3.65.0.500

2018.9V Super Version ICOM A2+B+C For BMW Diagnostic & Programming Tool With ISTA-D 4.11.30 ISTA-P 3.64.2 V2018.9 BMW ICOM Software Update 09.2018 BMW Software Update Version: 09.2018 BMW Programming ISTA-P 3.65.0.500 BMW Diagnostics ISTA-D 4.12.12 SDP  programming database 4.12.12 VIN 11.06.2018 ETK 08.2018 KSD 08.2018 INPA 5.00 WINKFP 5.2.3 NCS

ICOM A2 Fails to LAN Connection with Higher Voltage(fixed)-1

ICOM A2 Fails to LAN Connection with Higher Voltage(fixed)

Issues I met: There is some problem with my BMW ICOM A2. I mean, when voltage is higher then +/- 13,4V, ICOM A2 will restarts. When I start engine ICOM, ICOM restarts and fails to LAN connection, so that I can’t do live data diagnosis. And I tried to update

How to Solve BMW ICOM NEXT USB Device Not Recognized-1

How to Solve BMW ICOM NEXT USB Device Not Recognized

I had bought a BMW ICOM Next with HDD. I connect the 500G software HDD with my computer via USB cable. When the connection is ok, the indicator light of HDD flashes for a while and goes off. The system prompts “USB device not recognized” and “Please insert a disk

bmw icom a2

ICOM firmware upgrade instructions

1. Connect the ICOM to the computer with a network cable, and power up the ICOM with a 12V power adapter or Passengers pick up the bus. 2.Use IE browser to open http://169.254.92.38:60080/ (when diagnosing according to ICOM The IP address shown or the ICOM address read by ItoolRadar shall

bmw icom a2

How to Using BMW ICOM A2+b+c to program BMW F-Series chassis models

Using BMW ICOM A2+b+c to program BMW F-Series chassis models * Programming Control Unit * Set Code Control unit Control unit measures can be selected as follows: * Click on the control unit under the tab “Control Unit Tree” * Under the “TAB Edit Control unit”, either by direct selection